Dental Manufacturer Dental Grinding Instruments Dental Diamond Burs

dental instrument/dental bur Obtained FDA certification:

dental instrument/dental bur for processing equipment

dental instrument/dental bur How to use:
Before using UMG DIA-BURS, please see the instruction as indicated below.
1) Insert the shank into the handpiece according to the instruction of the handpiece manufacturer.Insertion should be the full length.
2) Before use, run the instruments to make sure there is no descentering. If the instruments become bent, be sure to remove them from any further use.
3) Please always use spray.
4) A Plentiful water supply is necessary to maintain long-lived performance and also to prevent loading and pulpitis.
5) Handle with care not to put excessive load. Pressure should be 20 to 50p for all instruments with diameter up to 023.
6) Use max. allowable r.p.m. of each instrument to avoid a possibility of being injured due to breakage. Avoid levering, tilting, twisting and jamming motion. Do not work with a pulling motion.
7) Wear a safety glasses and/or face mask to protect from being injured.
8) Do not use high pressure steam sterilizer which heats more than 200, including drying process. After using, follow appropriate treatment as the medical waste.